[ad_1]

Product Description

Easy To Use Vinyl Siding Removal Tool

Vinyl siding is durable and easy to maintain, but when it does become damaged, the convenience of a repair is diminished with how difficult it is to keep the wall and other panels from getting damaged. The hidden joints are definitely the biggest challenge that no screwdriver or hammer can successfully tackle.

This where this purposely designed siding removal tool or zip tool comes in. With a bend at the perfect angle, the zip tool will allow you to get under both the top and bottom edges of the vinyl siding. Your wall and vinyl siding will thank you for this tool! And you’ll even get to reuse the undamaged vinyl sidings!

Push the siding removal tool’s blade under a hole at the bottom edge of the siding. This hole is specifically designed for the zip tool to slide through. If you can locate this hole, you can look for a loose area along the length of the siding’s bottom edge.The vinyl siding panels overlap over what’s called the J-channels. Sliding through the edge of the vinyl panel, you can gain access to the back lip of the channel. Hook the tool onto the back lip, pull down, and then away to unhook the newly released back lip.Slide the tool back to the siding through the new opening and repeat the previous steps to release the entire length of the channel. To release the top joint, follow the same process above. Once removed, you can easily lift the panel from the bottom edge and expose the nailing hem.

The zip tool’s usefulness does not end there. You can also use the zip tool to interlock the J-channel of the upper panel and top lock joint of the newly installed panel. To do this, you need to use the tool to grab the lip of the J-channel and pull it onto the top locking edge of the panel below it. This is while you are also pushing from the outside to snap the joint lock in place.

VINYL SIDING REMOVAL TOOL – Also known as a zip tool, this handy and efficient tool is perfect for not only removing but also for installing and repairing vinyl siding. It does the work all while keeping the vinyl siding and the wall in pristine condition!
7 INCHES ONE-PIECE STEEL VINYL INSTALLATION AND REMOVAL TOOL – The blade and the body of this siding removal tool is made from a single 7-inch long piece of high-quality, high-strength, and durable steel. Virtually indestructible, this tool is built to last!
EXTRA LONG NON-SLIP RED HANDLE – The handle is not only extra-long, but it’s also more ergonomic, providing leverage, additional reach, and more ease in handling. The red coating aids in softening the grip and making the tool more visible. There are several tools like it, but at almost 2 inches longer than average vinyl siding removal tools, our red-handled non-slip tool brings in solid advantages.
AVOID DAMAGING VINYL SIDING WITH THIS ULTIMATE VINYL SIDING ZIP TOOL – What tool have you been using to install and remove vinyl siding? You need to drop all other makeshift tools. This zip tool is the only tool that can perform the job. No other tools and methods needed!
REMOVE OR ATTACH VINYL SIDING IN A SINGLE MOVE – Quick and easy installation and removal without damage to both the siding and the wall – that’s the guarantee that comes with this zip tool. Install, remove, and repair vinyl siding in one swift move! And with this 2-pack promo, you and an assistant can make quick work of an entire wall of vinyl siding!

[ad_2]

The post (2-Pack) Vinyl Siding Rem… appeared first on Sirrah Amazon Market.

[ad_1]
The beyond by BLACK+DECKER 84-Piece Tool Set is a complete kit for almost any home. It includes bits, drivers, wrenches, and the most common hand tools for DIY projects. The cordless electric drill provides the power you need to drill and drive to get the job done. Keep your tool kit handy in the included storage bag for portability and organization. You can trust Black and Decker to deliver the tools you need to make work easy. About beyond by BLACK+DECKER beyond by BLACK+DECKER curates tools for the DIYer and home improvement enthusiast. Make projects fun again with easy-to-use and efficient devices to tackle jobs of all sizes. Home, garden, and yard maintenance have never been this effortless.
Everything You Need: Includes a drill, a variety of drill bits and screwdriving bits, pliers, hex wrenches, tape measure, level, hammer, screwdriver, battery, battery charger and bag to help you complete home projects
Easy To Use Drill: Easy to use drill with long battery runtime to help you tackle your DIY and home improvement projects
Stop Stripping and Overdriving Screws: 11 adjustable clutch settings deliver the right torque setting for whatever project you are working on
Better Visibility: Integrated LED lights up your working area
POWERCONNECT Battery System: The same interchangeable battery powers your DIY projects with the same 20V MAX battery (Maximum initial battery voltage (measured without a workload) is 20V Nominal votlage is 18)

[ad_2]

The post beyond by BLACK+DECKER Ho… appeared first on Sirrah Amazon Market.

[ad_1]
What are the advantages of our spring clips clamps?

❥ Rubber coated tips of the metal spring clips help to protect surfaces from damage and soft coating on handles.

❥ These metal clamps heavy duty provides secure clamping power for carpentry.

❥ The tent clips clamps are heavy-duty and lightweight, which is easy to work with and tough enough to get job done.

❥ The metal spring clamps are ideal tools for securing tarpaulins, covers, craft work, photography, woodwork and used on car boot.

Featurese:

Material: Galvanized

Color: Red+Silver

Overall Length: 5 cm/2 Inch

Package Includes:

20 x Spring Clamps

Warranty after sale:

If you have any questions about the clamps for crafts, please contact us in time, we will solve your questions ASAP.

Warm Tips:

Dimensions are measured manually, please allow slight errors.

Color may vary slightly from the online image due to your monitor colour settings, please refer to the actual product, thank you for your understanding.

❥【Premium Material】The metal spring tent clamps are made of superb metal material with galvanized surface, strong and durable, not easy to rust, and corrosion-resistant. Fast firm positive gripping of both flat and odd-shaped workpieces. The spring clamps 2 inch are easy to work with and tough enough to get the job done.
❥【Easy to Use】Both heavy-duty and lightweight, making these spring clips very easy to work with and tough enough to get the job done. Strong clamps to fit onto most standard sized stands.
❥【Rubber-coated Design】The rubber-coated tip helps protect the surface of the object from damage, and the soft coating on the handle of the bulldog clips makes the grip more comfortable.
❥【Wide Applications】The multi-purpose clamp for a variety of projects, whether it’s for small arts & craft projects or using them to secure paper canvases for painting, blueprinting, securing fabric or backdrops, woodworking, DIY, and much more.
❥【Package Includes】You will receive 20 pcs spring clamps clips. The compact metal design of the clips clamps for woodworking provides secure clamping power for carpentry. Ideal for securing tarpaulins, covers, craftwork, woodwork, market stalls, etc.

[ad_2]

The post 20 Pcs 2″ inch Metal Spri… appeared first on Sirrah Amazon Market.

[ad_1]
The Handy Paint Cup is the little cup that could. It’s solvent resistant and holds up to a pint of paint or stain. Has a built-in magnetic brush holder and handle, it’s perfect for smaller paint projects like trim work and craft projects. Does not work with BER-2520 liners.
Perfect for trim work, touch-ups, smaller paint and craft projects
Built-in magnetic brush holder
Holds up to a pint of paint or stain
Solvent resistant-works with any paint or stain
Not compatible with HANDy Paint Pail Liner

[ad_2]

The post HANDy Paint Cup Holds 16 … appeared first on Sirrah Amazon Market.

[ad_1]
This 20V MAX XR ¼ in. 3-Speed Impact Driver is lightweight yet powerful with a brushless motor that delivers 1,825 in-lbs. of max torque to drive large diameter screws. The 3-speed switch allows for increased user control and precision for various applications to help maximize versatility on the jobsite. Maintain productivity in low-light spots with a 3-LED on-board work light that helps to illuminate dimly lit workspaces. This cordless impact driver comes Chip Ready (chip sold separately) to track the tool’s location with the DEWALT TOOL CONNECT Site Manager App. Battery and charger sold separately.
BRUSHLESS MOTOR delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws
COMPLETE TOUGH FASTENING APPLICATIONS on the jobsite with 30% more torque
PRO-LEVEL CONTROL and precision with variable speed trigger and 3-speed setting
BRIGHTEN WORK AREAS with an integrated 3-LED work light for ehnanced visibility in low-light areas

[ad_2]

The post DEWALT 20V MAX XR Impact … appeared first on Sirrah Amazon Market.

[ad_1]
The Spec Ops Tool Set includes a 15-inch flat bar and a 10-inch nail puller, both designed to deliver mission capability on the world’s toughest jobsites. The nail puller is up to 20% lighter, allowing for precise pulling of sharp nails with sniper control. The two nail pullers and precision-honed claws make it easy to remove small, embedded, and headless nails with extreme versatility and minimal damage. The dual strike zones are designed for accurate and rapid nail extraction. The 15-inch flat bar is 20% thicker and features multiple nail pullers for improved leverage. The curved rocker end is designed for sniper control when prying the most stubborn nail heads. The broad, precision-honed beveled ends allow for easier penetration with minimal damage. Both tools are made to last with high-carbon, spring-tempered steel construction and have been drop tested at 100 feet to surpass MIL-SPEC standard. They’re backed by a five-star, hassle-free lifetime warranty, providing peace of mind. And with each purchase made, 3% of proceeds go towards supporting veteran and first responder causes.
Tool Set includes 10″ Cats Paw Pry Bar, 15″ Flat Pry Bar
Dual strike zones for rapid nail extraction
Multi-leverage, heat-treated steel construction for extreme prying power
Precision-honed claws remove embedded or headless nails with minimal damage
Multiple nail pullers for added versatility
100’ drop-tested to ensure durability on the harshest jobsites
Limited lifetime warranty

[ad_2]

The post Spec Ops Tools 10″ Cats P… appeared first on Sirrah Amazon Market.

[ad_1]

Product Description

STUD FINDER WALL SCANNER

Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And A good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important.

JAXWQ stud finder uses UPGRADED SMART SENSORS which can sense the change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. You will not worry to drill many error holes on the wall while putting up a TV bracket, shelf unit, or even just a set of coat hooks on drywall.

How to use AC mode

Note: If in AC scan mode/Metal scan mode, you need to put the tool in the air to calibrate it.

Step 1: Put the tool in the air and press the ON/OFF button to turn on, then choose AC mode or Metal mode.

Step 2: Press Calibrate Button to start calibration, the decreasing bars will disappear the buzzer will beep one time and the calibration is completed. Then releases the scan button.

Step 3: Place the whole device against the wall, slowly slide the tool across the surface. Mark the location where you get the highest AC indication (the most Middle bars on the screen). (Figure A): If it is a strong target, the top indicated arrow will show, and a steady beep will sound. Continue in the same direction until display bars reduce. Reverse direction and mark the spot where the display bars peak from the reversed direction. The midpoint of the two marks is the location of the center of the live AC wiring. If the unit indicates live electricity over a large area, you can reduce the sensitivity of the tool to refine the scanning area and more accurately locate the live AC wiring by following steps 4 and 5 below.

Step 4: (Figure B) To further pinpoint the location of the live AC wiring, scan the area again. Release the Scan button and then turn the unit back on, this time starting on the wall over one of the previous marks. This will reset the tool to lower sensitivity and narrow the scan area.

Step 5: (Figure C) Scan in both directions as in Step 3. The area indicated should become smaller so you can more precisely identify the location of live AC wires.

For the Frames of Figure A B C, please kindly check the instruction in the package.

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in the 0.5in. or 1 in. StudScan Mode first.

After you detect the center of an object, Please Use Metal Scan to determine if the reading in Stud scan mode was a wood stud, metal stud, or pipe.

Metal Scan Detection

JAXWQ wall detector can locate metal studs in StudScan mode, DeepScan mode, and Metal Scan Modes. Since JAXWQ stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

How to use Stud mode

Step 1: Calibrate the tool before every scan

Place the whole device against the wall, then press and hold the calibration button( on the side of the tool) to calibrate this tool. Wait for the reducing bars to disappear and beep to confirm calibration has been completed.

Note: In stud/deep mode, put it on the wall where you want to detect to calibrate it; In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

After finishing calibration, please release the calibration button. Then move the stud finder along the wall slowly, if you shake or lift the scanner accidentally, the device needs to be re-calibrated.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of “Metal Scan Detection”)Then you can drill it to hang the thing.

Stud Finder Wall Scanner

[ad_2]

The post Stud Finder Wall Scanner … appeared first on Sirrah Amazon Market.

[ad_1]

From the brand

Our story

How we got our start Susie began her design career at the Dayton’s Home Store (now Macy’s) in Edina before forming her own firm in 2009. She has a Bachelor of Arts from Texas Christian University and an interior design certification from Century College. What makes our product unique As the owner of Susie Ries Interiors, Inc., a Twin Cities-based interior design firm, Susie specializes in high-end furniture, rugs and accessories for residential clients, and has been helping them achieve their home décor dreams for over two decades. Why we love what we do Your home is a place that should reflect you and the way you want to live. Susie Ries has the ability to tap into your lifestyle and create an environment around it. No matter your taste or budget, Susie can design your space in a way you didn’t even know you wanted.

PAINT BEHIND STARTER KIT INCLUDES: Each pack includes 1 Applicator, 1 Paint Tray, 1 Paint Pads
HARD TO REACH AREAS: Use PAINT BEHIND to paint tight spaces such as toilets, radiators, gutters, downspouts, refrigerators, stoves, cabinets, television, bi-fold doors, pipes, deck grooves, and more.
EXTENDS REACH OF 12 INCHES: Helps you easily paint behind fixtures and appliances that have been installed close to walls. The full-sized paint pad enables a smooth and wide even coverage.
DO-IT-YOURSELF: There is no need to hire a professional. This tool is perfect for do-it-yourself customers, pro painters, homeowners, contractors, interior designers, renovators, property managers.
EASY TO CLEAN: Just slip off the removable pad and use mineral spirits to clean oil-based paint and just wash off with water on latex paint.

[ad_2]

The post PAINT BEHIND -16 in L x 1… appeared first on Sirrah Amazon Market.

[ad_1]

From the brand

Shop More

Shop More

Shop More

Shop More

Shop More

PROFESSIONAL DESIGN – Experience long-lasting performance with this comprehensive screwdriver set tool kit, perfect for every home improvement project and professional repair.
EFFICIENT ORGANIZATION – Stay organized with the included tool racking system, ensuring your screwdrivers, bits, and magnetic tools are always within reach in your workshop or garage.
VERSATILE TOOLS – Equipped with a variety of screwdrivers, ratchet handles, sockets, allen keys, and more, this set caters to all your repair needs, from electronic fixes to gunsmith work.
EFFICIENT ORGANIZATION – Stay organized with the included tool racking system, ensuring your screwdrivers, bits, and magnetic tools are always within reach in your workshop or garage.
ULTIMATE GIFT – The ideal gift for mechanics, DIY enthusiasts, and handymen, this set offers versatility for both home and work, making it a top choice for men’s gifts this season.

[ad_2]

The post 124-Piece Ultimate Screwd… appeared first on Sirrah Amazon Market.

[ad_1]

From the brand

“Revamp Your Garage, Reignite Your Life!”Aking Ace we’re not just about garage storage; we’re about transforming your garage into a haven of organization and efficiency. We understand that your garage is more than just a place to park your car; it’s a valuable space that should enhance your life, not create chaos. That’s why we’re dedicated to crafting innovative storage solutions that help you reclaim your garage and elevate your lifestyle.

What We Do?

We want our customers to get better tool storage from us, and we strive to cost-effectively address the needs of every garage storage enthusiast.

We Quality?

We put quality first and always to maintain quality in our product design, research and delivery for our valued clients around the world, we work to have the most complete high quality garage tool storage rack brand service possible.

Why AKING ACE?

A garage is so special to us like many of you. So we designed, researched and built a brand to solve this need of tool storage. Let’s do, create and life with AKING ACE!

GARDEN TOOL STORAGE

SKI RACK

CLAMPING GARDEN TOOL ORGANIZER

MULTI-FUNCTION STORAGE RACK: Perfect wall mount garage tool organizer storage system, superb organization for garden tools, brooms , hoses , Yard Tools , pole cutters , hockey sticks , ski gears and more.
VERSATILE WALL STORAGE SYSTEM: An ideal wall mount storage system for organizing a variety of equipment in your garage, shed or yard. Perfect for storing long-handled tools ,Keeps all your gear neat, tidy and within easy reach
EASY TO RELOCATER & ADJUSTABLE: The Garage Storage system with 3pcs Steel wall racks (16 inch), 6pcs Double Hooks (10 inch), Garage hooks can be easily repositioned anywhere on tracks of the panel when storage needs change. And fast wall-mount hooks can install in a snap.
DURABLE RAILS & RUBBER-COATED HOOKS: This garden tool organizer has 6 hooks, each 10 inches long. The hooks are wrapped in rubber to protect your tools from sliding and getting damaged. Rubber-coated sleeves prevent your tools from getting scratched or slipping.
HEAVY DUTY STEEL & SAFETY : Garage Storage rack can totally hold up to about 350 lb , Garden tool wall mount storage rack is made of high-strength steel for sturdy and strong organization.
EXCLUSIVE DOUBLE HOOKS DESIGN: It is easy to hang all your tools of it to declutter the corner of your garage, and keep the garage well-organized. And be Able to Quickly Find the Tools You Need.

[ad_2]

The post Wall Mount Tool Storage R… appeared first on Sirrah Amazon Market.